Step 3 of 4 (back to Step 1)
Try to push your current post into your frame by the amount of the High value
ie. if you have a Reverb 125x420 and want to run a OneUp 170mm post, try to push your current post into the frame by 30mm more than the current depth (high value from the chart in Step 2). Be careful of your current actuator housing/hose. You will need to pull your housing/hose towards the remote as you lower the post.
My post went in no problem - Congrats the post you want will fit just fine. Go to the product page here to order.
My post was NOT able to be pushed in by the high value amount. Pick a shorter OneUp post and repeat Step 2