REMOTE INSTALL INSTRUCTIONS

Things You Will Need

  • 4mm Hex Tool
  • T25 Torques tool (SRAM MMX)
  • Pick Tool or 2mm Hex (Shimano)

Assembly time, approximately 10 minutes. Difficulty: Easy.

SPECS

Compatibility

22.2mm Bar Clamp - All other groups including 12 speed XT M8100 , SLX M7100 and all 10 speed Shimano
SRAM Matchmaker X - SRAM MMX clamps
Shimano I-spec-EV -  12 speed XTR M9100, XT M8100 and SLX M7100
Shimano I-spec II - 11 speed XTR M9000, XT M8000, SLX M7000 only

Weight: 

Remote with 22.2mm Bar Clamp - 46g
Remote with SRAM Matchmaker X - 43g 
Remote with Shimano I-spec-EV - 43g 
Remote with Shimano I-spec II - 41g

 

INSTALL INSTRUCTIONS

22.2mm Clamp
  1. Loosely attach the hinged clamp to your handlebar (Left side of brake for SRAM, Right side of brake for Shimano)

  2. Attach the remote body to the clamp using your preferred mounting hole.

  3. Torque the remote body to the clamp using a 4mm hex to 3Nm

  4. Loosen the 22.2mm clamp and rotate the OneUp dropper remote until the remote body is parallel to the brake lever

  5. Snug the 22.2mm clamp to 1Nm max.

 
Shimano I-spec II (11speed M9000, M8000, M6000 only)
  1. Remove the lever mounting bolt completely from the left brake using a 4mm hex

  2. Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp

  3. Remove the plastic spacer from the inside of the lever clamp

  4. Install the OneUp I-spec II adapter into the lever clamp

  5. Loosely reinstall the brake lever clamp onto the handlebar

  6. Attach the remote body to the I-spec II adapter using your preferred mounting hole.

  7. Torque the remote body to the I-spec II adapter using a 4mm hex to 3Nm

  8. Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.

  9. Torque the brake lever clamp to the manufacturer's recommendation

Shimano I-spec EV (12 speed XTR M9100, XT M8100 and SLX M7100)
  1. Remove the lever mounting bolt completely from the left brake using a 4mm hex

  2. Depress the "Push to Open" button using a 2mm hex to fully open the brake lever clamp

  3. Install the OneUp supplied T-nut into the curved recess on the hinged clamp

  4. Reinstall the brake lever clamp onto the handlebar

  5. Install the OneUp supplied IS-EV adapter onto the T-nut

  6. Attach the remote body to the IS-EV adapter using your preferred mounting hole.

  7. Torque the remote body to the IS-EV adapter using a 4mm hex to 3Nm

  8. Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.

  9. Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.

SRAM Matchmaker X
  1. Remove Brake lever mounting screw and hinged clamp using a T25 Torx

  2. Install the OneUp supplied T-nut into the curved recess on the hinged clamp

  3. Reinstall the brake lever clamp onto the handlebar

  4. Install the OneUp supplied Matchmaker X adapter onto the T-nut

  5. Attach the remote body to the Matchmaker X adapter using your preferred mounting hole.

  6. Torque the remote body to the Matchmaker X adapter using a 4mm hex to 3Nm

  7. Rotate the OneUp dropper remote until the remote body is parallel to the brake lever.

  8. Torque the IS-EV adapter bolt to the brake clamp using a 4mm hex to 3Nm.