Through headset routing for barspins
"I used this to allow easy routing of the front brake through the headset. Very easy to install and works perfectly!"
EDC Top Cap Kit
Threaded Top Cap.
The magic of the EDC Top Cap is how it's installed on your steerer tube. In order to install the Top Cap, you have to thread the steerer tube of your fork. Our EDC Tap Tool makes the job quick and easy. You don’t even need to remove your stem.
V2 Tool System.
The 20-function EDC V2 Tool is the heart of the Threaded EDC system. It includes a 10 function Multi-Tool, Tire Lever, Chain Breaker, steel spoke keys, quick link storage, and a small and large storage capsule designed to a jabber, tire plugs, and quick link pliers.
Plug & Plier Kit.
The EDC Plug & Pliers kit is the perfect addition to the Threaded EDC tool system. The full kit of pliers, a tire jabber, and additional plugs will only fit EDC Threaded and 100cc pump. Be ready for anything with EDC Threaded.
FAQ
Can I buy just the bottom fork plug? Or just the Top Cap?
We do not have the fork plugs or top caps available as a single item. They are only sold as apart of this EDC top cap kit.
Why is my tool hard to remove from the top cap?
It is likely that the top O-ring is dry. Best thing to do is rub a small amount of grease onto the o-ring and re-install it.
If that does not help, please email us at support@oneupcomponents.com.
Will threading my fork steerer void my fork warranty?
Although some companies will state that threading their steerers will void the warranty, we have not been shown evidence of any failures directly a result of a threaded steerer tube.
My tool Is stuck inside the top cap, what do I do?
There are a couple possibilities for this:
1. Is the mutli tool oriented correctly within the EDC tool body? If it is backward and not meshing will the tire lever, the tool will bulge and be difficult to remove
2. The multi tool side plate bolts have loosened off and are jamming against the top cap.
For both situations the solution is to: 1. Loosen the stem bolts
2. Using soft jaw pliers, or pliers with a cloth, loosen off the top cap.
3. pull the top cap and tool off the steerer tube.
4. Either remove the multitool, or tighten the side plate bolts. The tool will then slide out of the top cap and you can reassemble everything correctly.
Please email support@oneupcomponents.com if you have any trouble with this process, or damage anything, and we will be happy to help.
Can I install a star nut after threading the steerer tube?
It will irreversibly damage the threads you have tapped into your fork. However, if you need to install a star nut - it will work.
That said, if you revert back to a star nut - you will not be able to run a threaded top cap again, on that fork.
Reviews
Overall rating: 4.8430233 / 5 from 172 reviews.
AI Generated Review Summary
The EDC Threaded Top Cap is highly regarded for its exceptional quality, ease of installation, and perfect fit. Customers praise its lightweight design and variety of colors, making it a top choice for EDC tool storage. Opinions on the finish vary, with some finding it fragile.
Summary topics
- EDC Tool Storage: 4%
- Product Quality: 9%
- Product Appearance: 20%
- Installation Ease: 6%
- Tool Versatility: 23%
Review topics: ["fit","quality","looks","issues","color","design","finish","function","customer service","post","works","service","tool","cap","system","install","edc","kit","match","thought","idea","storage","solution","tap","space","rattle","fuss","video","addition","components"].
Review highlights
- "Easy installation, perfect fit, high quality product!" —
- "Perfect fit and color is nice!" —
- "All components were crafted well and the tool does actually work awesomely." —
Reviews
Wish I had gotten earlier
"After fitting 2 bikes with the threadless EDC holder I had a fork that would not fit one. I had been dubious on threading the steerer tube previously, but figured it was worth a shot. Stupid easy, more storage space. This is the route I will go from now on."
Edc
"easy to install with the tap, I have done my fox 40 and fox 38 forks now, bit of sanding for the fox 38 to get the tool to fit, 2015 fox 40 only fits small storage on the bottom(tapers down too much for the large storage) super happy with all Oneup component prodaucts"
Works well.
"Works well."
Overall really nice
"Found it to be an easy install overall if you follow the instructions and ensure enough spacer room above to preload the headset. I had previously noted quite a few people saying the top cap didn’t seat nicely with other cassette tools, resulting in scratching and damage to the top cap. I pre tested my cassette tool and found that there was a lot of play as well. I gave it a wrap with a bit of electrical tape and that was enough to snug it up and prevent damage to the top cap, without affecting the install on two bikes. Otherwise really happy with it. Considering adding one to my commuter bike as well."
Super easy to tap and
"Super easy to tap and use with the tap kit."
Great product!
"The EDC is awesome. I now have it on 3 of my bikes."
Pretty good! Innovative.
"worked well with great accent."
Amazing OneUp
"They helped me submit a warranty and got the part I needed. So thankful"
Love it
"Love it"
Q&A
- Hi, I have a 2022 Norco Range VLT A1 E-Bike and would like to fit the OneUp Components EDC V2 Tool - i am unsure if the Components EDC Threaded Top or the OneUp Components EDC Threadless Stem Tool Carrier will fit. The fork on the bike is FOX Performance FLOAT 38, 3 Position, 44mm Offset, E-Rated. Could you please let me know? Cheers Jason
- Hey Jason, Thanks for your message, I'm happy to help. For your fork, unfortunately only the EDC Lite is compatible, provided the steerer tube is at least 210mm long. Our 100CC EDC Pump would be a better option to carry the V2 Tool in this case. Please let me know if there's anything else I can help you with. Cheers,
- Morning, Andrew from Yarra Valley Cycles in Australia, just wondering when the EDC threaded top cap in blue, not dark blue, will be back in stock. Thank you.
- Hi Andrew, Thanks for your message, I'm happy to help. The original blue colour has now been discontinued, the newer darker blue will be replacing it. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
