Great product
"Great tool and easy to install. Would highly recommend to anyone looking for a tool to take on the trail."
EDC Threadless Carrier
Your Mobile Toolbox.
The Threadless Carrier is one piece of lightweight aluminum that keeps your EDC V2 Tool and a Plug Kit in your stem. EDC Tool not included.
Easy to Install.
It takes less than 10 minutes to turn your steerer tube into a portable workshop. Just remove the start nut, drop in the carrier and bolt it in place.
FAQ
Will the threadless carrier fit my Fox 38 fork?
The Threadless carrier is only comptible with Fox 38 Performance Elite & Factory series forks that have a steerer tube longer than 245mm.
I went to install my threadless carrier, and it stops before fully inserting into my steerer tube?
If the threadless carrier will not fully insert into your fork, then it is likely that the length of your steerer tube is less than the minimum requirement. Please double check your steerer length and compare it to our compatibility list before proceeding.
My tool does not fully insert into the threadless carrier?
There are three possibilities for this:
1. Make sure the middle O-ring has been removed from the EDC tool system.
2. Is the mutli tool oriented correctly within the EDC tool body? If it is backward and not meshing will the tire lever, the tool will bulge and will not fit into any holder.
3. Check the steerer tube length, if you there was any force required during installation of the carrier then it is likely under pressure and flexing. This means your fork steerer length is too short, or it is an incompatible fork.
Will the threadless carrier fit in a fork with a straight steerer?
It is possible with some pre-requisite checks.
1. Steerer ID meets the compatibility requirements for the Threadless carrier (Min ID: 24.25mm)
2. Steerer does not neck internally at any point. You can check this by running a straight edge down & against the internal wall of your steerer. If it deflects then it necks and is not compatible.
3. Steerer is within our compatible length range. 185mm-265mm
4. Your current Top cap will need to replace the 1-1/2 plug supplied with our Threadless carriers. So check that the top cap fits flush without rocking, in the underside of the fork steerer.
If you can confirm all of these requirements are good then you should have no issue installing our threadless carrier in your straight steerer fork.
Will the EDC Threadless carrier work in carbon steerers?
Unfortunately, none of our EDC options are compatible with forks with carbon steerer tubes.
Can you fit the plier and plier kit in the threadless carrier?
The plug and bacon strips with fit within the small storage capsule and then fit into the threadless carrier. The Pliers, the large storage capsule or a c02 cartridge do not fit in the threadless carrier.
How do I use the chainbreaker?
The chainbreaker is mounted to the tire lever. Using the T25 in the multi tool, loosen the chainbreaker and rotate it perpendicular to the tire lever. Using the 3mm in the multi tool, back the pin off, then you can position the tool around the chainlink and thread to pin back in until you have broken the chain!
Reviews
Overall rating: 4.734568 / 5 from 162 reviews.
AI Generated Review Summary
The EDC Threadless Carrier is highly regarded for its excellent performance, ease of installation, outstanding quality, and great system integration. Customers appreciate the easy access to tools and the smooth fit, making it a popular choice for quick fixes on the trail.
Summary topics
- Threadless Carrier Performance: 6%
- Product Quality: 7%
- Installation Ease: 24%
- Tool Performance: 28%
- Tool Access: 4%
Review topics: ["fit","quality","looks","issues","color","design","improvement","post","finish","instructions","setup","works","build","support","tool","install","carrier","system","cap","access","tube","buy","5 stars","solution","compartment","idea","hold","addition","machining","kit"].
Review highlights
- "Nice smooth fit, little gold accent looks great." —
- "I’m really pleased with my edc tool and thread less carrier." —
- "Great compact tool, hard installation" —
Reviews
Nice, but too long in my opinion
"This is a great piece of kit and solves the problem of carrying a multi tool, or really forgetting a multi tool. Good quality and have used others on another bike. My only complaint is it is too long and requires too long a steerer tube, They should make a shorter version by like 20 millimeters so you don't need a 190mm steerer tube."
EDC Threadless Carrier
"Knocked off a star because the larger storage tube won't fit with the threadless carrier. Otherwise the installation was very straightforward and it seems like a solid product."
Install was easy and works
"Install was easy and works as advertised. Well made product"
Easy tool holder in the classic green
"So easy to use and reminds me of bmx parts."
Great quality. Straightforward installation
"Great quality. Straightforward installation"
It was a present for
"It was a present for my son who is very happy with it."
Easy to install and a
"Easy to install and a great way for carrying tools"
I like the design so
"I like the design so much, I put it on all my bikes! Purchased a new bike and purchased another kit to install on it."
EDC Carrier
"Fit and finish are amazing. Easy install and fast shipping."
Q&A
- I have a trek fx+2 and am interested in the EDC thread less kit. Is this kit meant only for mountain bikes or will it fit a normal crossbike like the fx+?
- Hi Jonathan, Thanks for your message, I'm happy to help. The threadless carrier/lit will not fit your bike, mountain bike forks generally have a larger inner diameter, which is needed to fit the kit. The good news is the 100CC pump kit would work for you and give you the tools you need, plus a pump and CO2 inflator as well! Hope this helps, please let me know if there's anything else I can do for you. Cheers,
- Hi I'm about to cut my new Rockshox Lyrik 29" Steerer Tube down and install it in my new bike. I would like to cut the steerer tube to 205mm to have room for just 25mm of spacers (25mm crown, 125mm headtube, 30mm stem). You're compatibility chart mentions that Rockshox Forks need a minimum of 220mm long steerer tubes. Why is that? In my understanding the EDC thredless carrier can be installed from 185mm upwards. Do I need to add 15mm more spacers and cut my steerer tube to 220mm, or can i proceed as planned and cut it to 205? Thanks for your help in advance!
- Hi Michael, Thanks for your message, I'm happy to help. Rockshox forks have quite a high internal necking that means they require a longer minimum length than some other forks. You'll need to cut your fork to 220mm for the threadless carrier to work. Hope this helps, please let me know if there's anything else I can do for you. Cheers,
