157 Rear Hub
Easier Lacing.
Updated flange drillings make wheel-building easier than ever, with inboard and outboard spokes both passing through freely, unobstructed by rotor mounts.
XD Slim Compatible.
If you're running the latest wireless 7-speed DH drivetrain on a bike with 148mm spacing, the new XD Slim driver delivers more even spoke tension and a stronger wheel when combined with our 157 Hub shell.
Free Speed.
Updated endcaps ensure a smooth, free-spinning, broken-in feeling, right out of the box.
FAQ
How long is the warranty period on this product? What does it cover?
OneUp Hubs have a 2-year warranty on all components, excluding bearing wear.
How regularly should I service my Hubs?
Hub service intervals vary depending on your riding frequency and the climate. Once annually is recommended for average usage, and as regular as 3 months is possible with heavy usage. To check if your hubs need servicing, remove the wheel and spin it in your hands by holding the end caps. If it feels or sounds rough and notchy, it's likely time for a service. It is also recommended to clean and regrease your rachets as regularly as possible.
Does the OneUp Hub use a DT Swiss ratchet?
OneUp Hubs use a OneUp-specific ratchet and spring. You cannot use a DT Swiss Ratchet in a OneUp Hub.
Will OneUp's SRAM XDr freehub work with my SRAM XD cassette?
Yes, our XDr Driver is compatible with both SRAM XD and XDr cassettes. For SRAM XDr cassettes, simply remove the pre-installed 1.85mm spacer.
Why do OneUp Hubs use a machined drive ring over a threaded option?
CNC Machining the drive ring directly into the hubshell eliminates a common failure point, where a threaded steel drive ring can strip and tear the threads out of the hubshell, while also saving weight.
Where are & how do I read the hub dimensions to measure spoke length?
The Hub dimensions are on the product pages and lasered onto the center of the hubs.
PCD stands for Pitch Circle Diameter and refers to the distance between opposing spoke holes on the hub flanges (from the center of the hole).
Flange Dist refers to the distance from the center of the flange to the center point of the hub.
L stands for Left & R stands for right.
These four measurements, along with your hub spacing (110 or 148mm) and the ERD of your rim is all you need to measure spoke length. Please use your preferred spoke calculator to complete the measurement!
