EDC C02 Inflator Pump head Instructions
The inflator head of the pump (the anodized green part) doubles as a CO2 inflator head, simply unthread it from the pump and you can thread your CO2 right onto it.
It can be quite snug from assembly, the first removal may require you use an 8mm hex key to unthread it from the pump body.
Inflator Instruction
-
thread CO2 cartridge fully onto inflator head
-
press inflator head onto presta valve
-
to inflate back off CO2 cartridge a half turn
-
tighten CO2 cartridge to stop inflation
