Carbon E-Bar
FAQ
How does the OneUp Carbon Handlebar compare to other carbon handlebars on the market in terms of comfort and responsiveness?
We have bench marked our OneUp Carbon Handlebar against the most popular carbon bars on the market and the results were a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains and make the OneUp Carbon Handlebar one of the most comfortable and responsive bars on the market.
What are the dimensions of the OneUp Carbon Handlebar?
The OneUp Carbon Handlebar has a geometry of 800mm wide with a 35mm diameter and a sweep of 8° back and 5° up.
How much does the OneUp Carbon Handlebar weigh?
The OneUp Carbon Handlebar weighs 220g for the 20mm rise option and 225g for the 35mm rise option.
How does the OneUp Carbon Handlebar minimize arm pump and vibration?
The OneUp Carbon Handlebar minimizes arm pump and vibration with its patented oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This shape maximizes steering response while minimizing arm pump and vibration.
How does the OneUp Carbon Handlebar help decrease hand pain when riding mountain bikes?
The OneUp Carbon Handlebar minimizes hand pain by providing a more comfortable and compliant ride. The bar's patented oval shape combines the best ride characteristics of 31.8mm and 35mm bar standards into one package, maximizing steering response while minimizing arm pump and vibration. This leads to less fatigue and hand pain during long rides.
How short can I cut these bars down?
Our bars can be cut down to a minimum of 740mm. Any further you risk clamping your controls onto the ovalized flex zone of the bar. Doing so could compromise the integrity of the bar.
Do the decals come pre-installed?
The decals do not come installed. They are shipped on two sheets with a few other decal options for you. The lasered Gloss black "ONE" logo on the bars is a guide to help you position the colors decal kit.
Are the cable ports compatible with my Specialized?
Specialized wiring is too large in diameter to fit our E-bars wire ports. You can still use our E-bar, but you will not be able to internally route the wires.
What is the torque spec on these bars?
Max torque specs for our carbon bars is 6Nm for the stem clamp and 5Nm for the controls (brakes,shifter, grips). Grips with a single outer clamp are also not compatible with our carbon bars.
